Company Name :
Chempure Technologies Private LimitedÂ
The Chempure centrifuge is a specially developed Solid-Bowl centrifuge for effective separation of slurries into liquid and solid phases, with the application of centrifugal sedimentation principle.
The centrifuge is fed through a stationary pipe, which is inside a hollow shaft connected to the screw conveyor (scroll). There it enters a feed compartment (inside of the conveyor) and is accelerated through feed ports into the inside of the bowl. Once inside the bowl centrifugal forces accelerate the solids. They are then collected on the inside diameter of the bowl wall and the liquid forms a concentric annulus and fills the bowl to the level of the effluent weirs.
The screw conveyor, which is connected through a spline coupling to a gearbox, turns slightly slower than the bowl. Since it is turning slower and the helix is angled in a manner to remove the settled solids toward the small diameter (conical end) the solids are then conveyed along the inside diameter of the bowl to the solids discharge end.
The liquid flows around the screw conveyor and exits through effluent weirs located on the large diameter (cylinder) end of the bowl. Solids, which do not settle to the inside diameter of the bowl, are carried out with the liquid through the effluent weirs.
Effluent weirs that are adjustable control the amount of liquid inside the bowl. The maximum volume (pool) forms an annulus diameter, which is smaller than the solids discharge diameter. There, the liquid always flows to the cylinder end. We work to continually improve the feed capacity on solidbowl machines.
Please wait...
